First 3D Printing Failure! Support Collapse Results in Noodle-Like Print…

After a month of 3D printing, I finally experienced my first failure. 😅

While printing a craft item, the app suddenly notified me that AI detected an anomaly. I rushed over to take a look—what a surprise:

First 3D Printing Failure! Support Collapse Results in Noodle-Like Print...First 3D Printing Failure! Support Collapse Results in Noodle-Like Print...

As you can see, one of the supports was completely missing, causing the main print to enter a “noodle mode” 🍝.

So I tried printing it again:

First 3D Printing Failure! Support Collapse Results in Noodle-Like Print...

The result… was the same support collapsing again. However, this time it held on a bit longer, managing to support the model until the end.

After removing the print and doing some minor repairs, the final product looks something like this:

First 3D Printing Failure! Support Collapse Results in Noodle-Like Print...

(The End)

Related posts

  1. CMV Series High Voltage Soft Starters Empowering the Circuit Board Manufacturing Industry
  2. Tesla Considers Shifting Dojo 3 Chip Production from TSMC to Samsung and Intel
  3. The Battle for the Trillion-Dollar AI Chip Market: Who Will Prevail?
  4. Tencent: Comprehensive Adaptation to Mainstream Domestic Chips
  5. Storage Chips: The Super Cycle of Domestic Storage is Gearing Up (Including Related Companies)
  6. Ultra-High Precision Micro-Scale 3D Printer: Printing Micron-Level Structures with Light Beams
  7. Step-by-Step Guide to Jlink Serial Printing Techniques
  8. Embedded Reading Notes: The Definitive Guide to Cortex-M3 (Part 1)
  9. Introduction to Python Functions
  10. How to Quickly Locate Ground Lines on a Circuit Board
  11. Beginner’s Guide to Python: A Step-by-Step Tutorial on the While Loop
  12. Short and Efficient: How to Communicate with Multiple Slave Serial Ports Using a Single Microcontroller Serial Port?
  13. Running .mo Files in Modelica/Dymola via Python
  14. Basic Usage of the Python Pillow Library
  15. In-Depth Analysis of GESP Certification C++ Level 1 Questions (Multiple Choice Part 2)
  16. Humanoid Robots and 3D Printing: Companies Making Strategic Moves
  17. The Development Potential of Additive Manufacturing (3D Printing) in the Low Altitude Economy
  18. Technology | Swedish Team Creates Functional Vascular Artificial Skin Using 3D Printing Technology
  19. Injectable ‘3D Printed Skin’ May Repair the Dermis Layer

Leave a Comment