Introduction
SD card reading and writing refers to the process of microcontrollers reading and writing to SD/TF cards. The SD card is a low-voltage flash memory product that has standard MMC/SPI operation modules. For the MMC operation mode, the reading and writing speed is fast, but it has more control signal lines and is more complex to operate. On the other hand, the SPI operation module is slower, has fewer lines, and is relatively simple to operate.
This course is a classic video tutorial for learners of SD card module design, aimed at beginners. It teaches you step by step from scratch how to learn microcontroller module design, progressing gradually with theoretical explanations combined with practical project development, including the current most popular C programming for the 51 microcontroller!
The highlight of this tutorial is its systematic and detailed introduction to the basic knowledge of the 51 microcontroller module based on the analysis of beginner cognitive patterns. This course breaks the traditional teaching model by adopting a module production method through practical examples, covering the application of the module, introduction to module components, necessary microcontroller theoretical knowledge, hardware circuit design, and C language programming for the 51 microcontroller. It cleverly integrates the principles and applications of microcontrollers, hardware circuit design, and C language programming into the module project, making you proficient in microcontroller module design, allowing learners to practice while learning, thus efficiently mastering knowledge and enhancing hands-on skills.
Through multi-angle and multi-faceted explanations of module instantiation, readers not only master the basic skills of microcontroller system development but also broaden their horizons on popular applications of microcontrollers. Therefore, this course is suitable for enthusiasts related to microcontroller learning, electronic competitions, product development, and graduation design.
Course Details:
The “Practical Tutorial on SD Card Module” is designed and planned by a professional team of electronic engineers from Changxue Electronics and is recorded exclusively. This course mainly introduces the process, methods, techniques, and design ideas of 51 microcontroller module production development through module instantiation, combining software and hardware, in a clear and easy-to-understand manner. This course mainly discusses the SPI communication protocol, SD card interface modes, SD card communication protocols, and hardware explanations and program analysis of the SD card.
Course Outline:
Lesson 1: Introduction to SD Card Knowledge
1. Introduction to SD card;
2. Two interface modes of SD card;
3. Introduction to the communication protocol of the SD card.
Lesson 2: SPI Communication Protocol of SD Card.
1. Introduction to SPI bus protocol;
2. Detailed explanation of SPI timing diagram;
3. SD card commands.
Lesson 3: Explanation of SD Card Program.
1. Working state of the SD card;
2. Operation process of the SD card in SPI mode;
3. Hardware explanation and program analysis of the SD card.
Course Details:
This course uses the SD card module production as an example to explain in detail the production process of the 51 microcontroller module design, the basic knowledge of the module, program writing, and practical application development, combining theory with practice. Based on instance development explanations, this course’s videos are high-definition, with a clear directory structure and detailed graphic explanations. Below are some screenshots of the video pages.
Friendly Reminder:
Click the link: http://www.eeskill.com/course/id/12
Or read the original text, log in to Changxue Electronics website to order online and start learning!
To facilitate better learning for everyone, Changxue Electronics has specially added a public account focused on microcontrollers and EDA, pushing related knowledge daily, hoping to assist your learning!
