Recently, the author conducted research and found an article titled “Improvements and Applications of Light-Sensitive Resistor Experiments Based on Arduino” published in the July 2021 issue of the journal Physical Bulletin. This paper comes from Jiangsu Normal University and the Jiangsu Provincial Key Laboratory of Advanced Laser Materials and Devices. Upon studying the paper, it … Read more
Experimental Scene 1 Introduction Recently, I have been deeply researching the “hands-on” experiments in the new textbook section on “Electromagnetic Induction,” exploring the relationship between the height of a falling magnet and the maximum induced current in a coil. The first attempt used a DC ammeter to represent the maximum reading as the peak value … Read more
1 Introduction After conducting the experiment “Plotting the P-R Characteristic Curve of the Power Supply,” using the existing circuit and making a few modifications to the experimental source code, the microcontroller successfully performed the experiment “Plotting the Relationship Curve between Power Supply Output Voltage and External Resistance.” 2 Circuit Setup for the Experiment Connect a … Read more
Recently, we studied the relationship between the current in various parts of a voltage divider circuit and the movement of the sliding contact, drawing the relationship graph with the help of Geogebra. Now, we use Phyphox for experimental exploration to see if the theory matches the practice. Maker Jiaozuo Early Research Using Geogebra to explore … Read more
Experimental Scene 1 Introduction Recently, I have been deeply researching the “Do It” experiments in the new textbook section on “Electromagnetic Induction” to explore the relationship between the drop height of a magnet and the maximum value of the induced current in a coil. When using the maximum reading of a DC meter as the … Read more
1 Introduction After conducting the “Plotting the Power Supply Volt-Ampere Characteristic Curve” experiment, the microcontroller successfully replicated Teacher Mei’s experiment on “Plotting the Relationship Curve Between Power Output and External Resistance” using the existing circuit with only minor modifications to the source code. 2 Circuit Experiment Setup Connect a 10-ohm fixed resistor in series with … Read more
Recently, the microcontroller obtained a coil and conducted a coil induction experiment using ESP32 and Phyphox. Due to the small inductance of the coil, the induction phenomenon was not very obvious, but the technical solution has been validated. If a coil with more turns and an iron core can be obtained, the experimental effect should … Read more
Recently, I found a very magical device in my desk drawer. Upon closer inspection, it turned out to be an ultrasonic distance sensor from a kit given during a Maker Education Instructor training in Zhengzhou back in 2016. This device has been lying in the drawer for nearly 5 years. Is it still usable? I … Read more
1 Introduction Recently, during the joint examination, there was a question about measuring the electromotive force (EMF) and internal resistance of a power source using the voltage-resistance method. Considering the authenticity of this experimental background, we validated the experiment using ESP32 and Phyphox. 2 Question Review and Reference Analysis 3 Experimental Validation In this validation … Read more
Recently, we conducted an electromagnetic oscillation experiment using Phyphox, ESP32, and ADS1115. The results were very satisfactory, and we witnessed the oscillation of current in the LC oscillation circuit composed of the coil and capacitor. Following the diagram, we connected the ESP32 and ADS1115 using DuPont wires. The wiring was quite complex due to the … Read more