The Raspberry Pi is currently the most popular single-board computer. You can use it in your DIY projects, or as a cost-effective system to learn programming, or for your convenience, run a streaming software on it as a streaming device.
You can do a lot with the Raspberry Pi, but it is
If you are skilled or just looking to choose some equipment for your model home, here are seven balancing robots available for purchase or DIY.
1. Instabots, priced at $99.99, is
The community public account records the maker-related content worth sharing every week, released every Friday～
Content is open source, contributions or recommendations for related content are welcome.
Submission email:[email protected]
▲ Source: Twitter
A prosthetic hand controlled by myoelectric signals based on Arduino and a series of sensors, capable of holding
Source: Circuit City
Editor: strongerHuang
Arduino is a convenient, flexible, and easy-to-use open-source electronic prototyping platform. It is very easy for beginners to grasp while providing sufficient flexibility. Arduino is not only the world's most popular open-source hardware but also an excellent hardware development platform and a trend in hardware development. With Arduino, we can easily create many interesting electronic designs. Here are
Arduino is a user-friendly open-source hardware platform that is popular among DIY enthusiasts and engineers. It provides a rich set of libraries and a development environment, enabling even beginners with no background to quickly get started with embedded development. This article will demonstrate how to use Arduino for development through several specific creative projects, allowing you to experience the joy of embedded development and gain practical experience.
This project aims to develop
This article comes from the Breadboard Community DIY Contest. If you have DIY works, feel free to share your electronic designs and win a DJI Drone!
1 Overview
Typically, the concept of a smart home includes Xiaomi voice assistants, Baidu speakers, smart doorbells, remote-controlled wireless LED lights, wireless switches, and smart locks. More broadly, there are the
[3D Printing Daily] Issue 530
Don’t worry if you don’t have a printer, you can click the public account menu 'Local Printing' to contact local friends for printing.
[ID:610934] 3DpBurner is an open-source laser cutter/engraver.
It is created using the same RepRap concept, utilizing 3D printed parts and some easily found 'vitamins' (not printed hardware).
I tried to do this as cheaply as possible by using inexpensive electronics and
MAKER:snowbiscuit／Translated by: Qu Wujin
Let’s take a look at its appearance
Let’s start with a brief introduction
Dimensions: 65mm*30mm
Raspberry Pi Zero W specifications are as follows:
BCM2835 processor, 1GHz clock speed, 512MB RAM
BCM43438 WiFi / BT chip
micro-USB power port
micro-USB OTG port
miniHDMI port
CSI camera interface
micro-SD card slot
40-pin GPIO expansion interface
Please note:
1. The performance of Raspberry Pi Zero W is quite low, similar to the first generation
Let's become technology enthusiasts together
Author: iwoox
This project uses Arduino open-source hardware to quickly create a weather station with unlimited data transmission capabilities. I previously created a weather station project with data logging functionality, and this is an upgraded and improved version.
First, we need to add wireless data transmission functionality from the weather station to the indoor receiver, removing the SD card module and replacing
