DVS

Low Power Design Methodology – Part 1

by
Low Power Design Methodology - Part 1

Methods Related to Low Power: 1. Clock Gating The RTL code must follow the low power style, and there should be at least three or four registers after the enable signal for the tool to synthesize it into a clock gate. 2. Lower VT 3. Gate Level Power Optimization 4. In terms of architecture, this … Read more

Calibration of DVS Humidity Sensors Using Saturated Salt Solutions

by
Calibration of DVS Humidity Sensors Using Saturated Salt Solutions

Introduction The humidity sensor is a key component of the Dynamic Vapor Sorption (DVS) instrument. To obtain accurate results, the humidity sensor needs to be calibrated regularly. It is recommended to calibrate at least once every six months. Please note: Calibration is only to verify the accuracy over the past period, not for the future. … Read more