▲ Click☆to star me to avoid losing contact 1. Introduction This time we will configure PWM output based on RTD, without further ado, let’s get started. 2. Configuration Steps 1. Load the driver For this experiment, we need to add these configurations yourself. 2. Port Configuration Make the following configurations. After entering 2 here, the … Read more
▲ Click☆to star me to avoid losing contact Project Introduction This trial project is based on the NXP S32K312 series core board, aiming to collect analog signals through the ADC module and observe the collected data in real-time via Jlink debugging. The S32K312 is a high-performance automotive-grade microcontroller launched by NXP, equipped with rich peripheral … Read more
▲ Click ☆ to star me, in case of losing contact Project Introduction This trial project is based on the NXP S32K312 series core board, aiming to collect the analog signal from a potentiometer using the ADC (Analog-to-Digital Converter) to control the duty cycle of PWM (Pulse Width Modulation), thereby achieving the manual dimming function … Read more