communication settings

DeviceNet Slave to PROFIBUS Slave – ADFWEB Gateway

by
DeviceNet Slave to PROFIBUS Slave - ADFWEB Gateway

DeviceNet Slave toPROFIBUS Slave – ADFWEB Gateway– Guangzhou Xinyu IoT Author:www.adfweb.com.cn Zou Wuyi Mobile185-020-77899 Email: [email protected] 1 Features: The configurableDeviceNet Slave / PROFIBUS Slave converter has the following features: • Achieves bidirectional information transmission between theDeviceNet network and thePROFIBUS network; • Electrical isolation between the two buses; • Supports a maximum of244 bytes for reading … Read more

Detailed Explanation of MODBUS RTU Communication for Mitsubishi FX5

by
Detailed Explanation of MODBUS RTU Communication for Mitsubishi FX5

MODBUS RTU Communication Settings for Mitsubishi FX5 MODBUS RTU communication falls under the category of serial communication. The MODBUS serial communication function of the FX5 can control 32 slave devices when using RS-485 communication and can control 1 slave device when using RS-232C communication. In practical applications, the choice between RS-485 and RS-232 mainly depends … Read more

SNMP Proxy to CANopen – ADFweb Gateway Converter

by
SNMP Proxy to CANopen - ADFweb Gateway Converter

SNMP Proxy to CANopen – ADFweb Gateway Converter– Guangzhou Xinyu IoT Author: Zou Wuyi Mobile185-020-77899 Email: [email protected] 1 Features: HD67156 – A1 and HD67156 – B2 are SNMP Proxy /CANopen converters. They have the following features: • Maximum data read capacity of 1024 bytes, maximum data write capacity of 1024 bytes; • Triple isolation between … Read more

CAN Bus to DeviceNet – ADFweb Gateway Converter

by
CAN Bus to DeviceNet - ADFweb Gateway Converter

CAN Bus to DeviceNet—ADFweb Gateway Converter– Guangzhou Xinyu IoT Author: Zou Wuyi Mobile185-020-77899 Email: [email protected] 1 Features: The CAN Bus to DeviceNet gateway has the following features: Realizes bidirectional information transmission between the CAN bus and DeviceNet network; Provides electrical isolation between the two buses; Can read CAN bus frames from DeviceNet frames; Can write … Read more

How Does PLC Communicate with HMI? [Essential Knowledge]

by
How Does PLC Communicate with HMI? [Essential Knowledge]

When we are establishing communication between HMI and PLC, we need to address a key issue, which is the parameter settings for the communication connection between HMI and PLC. This is a common question among many learners and is a focal point of our study. The communication between the touchscreen and PLC can be divided … Read more