Scope of Construction for Secondary Processing Exhaust System
kimoAIPro
Installation Process for Secondary Processing Exhaust System
kimoAIPro
Construction Specifications SOP for Secondary Processing Exhaust System
kimoAIPro
Installation Instructions for Secondary Processing Exhaust System
kimoAIPro
Key Installation Points
The installation of the secondary processing exhaust system generally does not have many technical restrictions. However, one point must be designed! The lowest points of each section must be designed with drainage outlets (water seal design), and the duct must be designed to slope towards the drainage outlet! This is especially important as the accumulation of acidic and alkaline exhaust can significantly corrode the duct! Special attention must be paid!
▼Friends interested in factory operations can follow us▼
Disclaimer：If other content is reproduced from the internet, the article does not represent the views of this site, it is for reference only, and the copyright belongs to the original author. If there is any infringement, please contact us for deletion. If the recruitment information has expired, please contact the backend for timely deletion.【Friendly Reminder】Due to changes in the public accountpushing rules, it will no longer be arranged in chronological order. If you do not want to miss factory operations carefully prepared recruitment information and exciting activities and courses, please set factory operations as “starred”, and after reading the article, click “Looking” at the end!