The leader in the chip programming industry, ACROVIEW, recently released the latest update for its programming software and a list of newly supported chip models, among which the Hercules H1D03N3W72 programmable video bridge has been supported by ACROVIEW’s universal programming platform, AP8000.
H1D03N3W72 is a programmable video bridge device that supports various mobile image sensor and display protocols and interfaces. It integrates a highly flexible FPGA, low-power MCU, hard-core MIPI D-PHY transceiver/controller, and commonly used peripherals into a compact, cost-effective package.
H1D03N3W72 supports a rich set of video interfaces, including MIPI®, MIPI DBI, CMOS camera and display interfaces, MIPI D-PHY, MIPI CSI-2, MIPI DSI, and SubLVDS.
H1D03N3W72 provides various preset IP (Intellectual Property), allowing designers to freely focus on their unique designs using these configurable soft-core IPs, hard-core IPs, and MCUs, thus improving work efficiency.
H1D03N3W72 can support real-time high-resolution, high-bandwidth mobile interface cameras and displays at 2K UHD and above, making it widely applicable in markets such as smartphones, tablets, wearable devices, VR, AR, drones, and smart homes.
Features
FPGA
• SRAM-based FPGA architecture
– Up to 2048 6-input lookup tables, 4096 DFF registers
– Performance up to 200MHz
• Embedded RAM storage module
– 8 18Kbit programmable dual-port DPRAM
• Embedded DSP module
– 16 18×18 DSPs available as 32 12×9 DSP units
• Clock network
– 8 skew-corrected global clocks
– Frequency accuracy up to 1 +/-5% after OSC correction
– 1 PLL supporting frequency multiplication, division, phase shift, and skew correction
– 6 external clock inputs
– Dynamic clock management system
• 2 hard-core 4-channel MIPI interfaces
– Programmable transceiver control interface
– Single channel 1.5Gb/s, 6Gb/s total for each MIPI interface
– Programmable host and device MIPI controllers
• I/O
– Supports 3.3/2.5/1.8/1.5/1.2V LVTTL/LVCMOS
– Programmable source-synchronous I/O
– MIPI D-PHY, LVDS Rx, LVDS Tx, and BLVDS
– Up to 1200Mb/s per I/O
MCU
• Enhanced 8051 MCU
– Streamlined instruction cycle (12 times standard 8051), MCU clock frequency up to 200MHz
– Compatible with 8051 instruction set
– Supports up to 8MB data/code memory expansion
– Supports hardware 32/16-bit MDU
– On-chip debugging system (OCDS)
– 8-channel DMA
• Peripherals
– 3 16-bit timers
– 1 I2C interface
– 1 SPI interface
– Host rate up to 100Mb/s@200MHz
– Slave rate up to 25Mb/s@200MHz
– 2 full-duplex serial ports, rate up to 6.25Mb/s@200MHz
– Enhanced hardware arithmetic unit supporting multiplication, division, shifting, and normalization
• Supports STOP and IDLE mode power management
Memory
• Embedded SRAM memory
– 8Kx32b single-port SRAM
– 2*2Kx32b single-port SRAM
– Flexible memory configuration for FPGA or MCU
Configuration
• Configuration modes
– JTAG mode
– Active serial mode (AS)
– Passive serial mode (PS)
Security
• 256-bit AES configuration stream encryption/decryption
• Protect FPGA and 8051 firmware IP against copying, cloning, and tampering
• Application examples
– Two-input one-output MIPI DSI display interface bridging
– Two-input two-output MIPI DSI display interface bridging
– MIPI DSI to FPD-Link LVDS display interface bridging or FPD-Link LVDS to MIPI DSI display interface bridging
– MIPI DSI to CMOS display interface bridging or CMOS to MIPI DSI display interface bridging
Packaging
• STFBGA144
• LQFP128
• QFN56
• WLCSP58
• WLCSP68
• WLCSP72
Architecture block diagram
The AP8000 universal programmer independently developed by ACROVIEW includes three main components: host, baseboard, and adapter.
The host supports USB and NET connections, allowing multiple programmers to be networked for simultaneous control of multiple programmers for programming. The built-in chip security circuit ensures that any short circuit caused by incorrect chip placement or other reasons can be immediately detected and powered off to ensure the safety of the chip and programmer. The embedded high-speed FPGA greatly accelerates data transmission and processing. The back of the host has an SD card slot, allowing project files created by PC software to be placed in the root directory of the SD card and inserted into this slot. Commands such as project file selection, loading, and programming can be executed via buttons on the programmer, enabling operation without a PC, thereby greatly reducing the hardware configuration cost of the PC and facilitating a quick setup of the working environment.
AP8000 enhances the expandability of the host through the baseboard and adapter board, currently supporting all mainstream semiconductor devices produced by manufacturers such as TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., supporting file formats including Intel Hex, Motorola S, Binary, POF, etc.
Company Introduction
About Hercules: Hercules is one of the earliest companies in China to engage in independent research and development, large-scale production, and mass sales of general-purpose FPGA chips and next-generation heterogeneous programmable computing chips. It possesses independent and complete intellectual property rights covering all-stack technology fields such as FPGA core design, SoC architecture design, chip development, EDA software development, IP development, and integration. Hercules has established four major product directions: high-end FPGA chips for data centers/electric vehicles/5G; AiPGA chips for artificial intelligence; heterogeneous computing FPGAs and HPA chips for new infrastructure/industrial IoT; and eFPGA cores for embedded applications.
About ACROVIEW: ACROVIEW is a global leader in semiconductor chip programming solutions, committed to changing the world through technology and driving the future with intelligence, continuously creating value for customers. ACROVIEW’s AP8000 universal programmer platform and the latest IPS5200S programming automation solution provide one-stop solutions for customers in the semiconductor and electronics manufacturing fields, serving leading global customers including Huawei, BYD, and Foxconn.
Scan to Follow Us
ACROVIEW Service Account
ACROVIEW Subscription Account