Create a project with 3-axis EtherCAT motion control in InoProShop. The following are the detailed steps: Step 1: Create a New Project Step 2: Configure the EtherCAT Master Step 3: Add 3 SV630N Servo Drives as Slaves Step 4: Add CIA402 Axes for Each Servo Drive and Configure Axis Parameters Step 5: Create Reusable Axis … Read more
The Inovance InoProShop software is used for programming its AM500 series PLCs. The communication configuration steps for the AM500 series PLC as a Modbus TCP server (slave) are straightforward, as it integrates standard Modbus TCP function blocks. Below are the detailed steps, divided into server (slave) configuration and client (master) configuration. Typically, the AM500 acts … Read more
In the Inovance Inoproshop software, configure the RS485 master station for the AM500 series PLC (using Modbus RTU as an example). Inoproshop is developed based on Codesys, and its configuration method is more standardized and graphical. Below are the detailed steps: Part One: Hardware Connection (Same as AutoShop) Confirm the port: The RS485 port on … Read more
Search on WeChat Technical Training Preparation: Hardware: Huichuan AM401 PLC, one USB to RS485 converter. Software: InoProShop (V1.6.2), Serial Assistant, Modbus-RUT slave simulator. Serial Debugging Process: 1. Program the PLC. 2. Use the Serial Assistant to check if the characters sent by the PLC are correct. 3. Connect the actual device for PLC-device debugging. (You … Read more