Proteus 7.5 Software Installation Guide

[Name]:Proteus 7.5

[Size]:63.26MB

[Language]: Simplified Chinese

[Applicable Systems]:Windows 7, Windows 8, Windows 10, Windows 11

[Introduction]:Proteus is an embedded system simulation development software that implements a complete design from schematic design, microcontroller programming, system simulation to PCB design, truly achieving the full design from concept to product. Its processor models support 8051, HC11, PIC10/12/16/18/24/30/DsPIC33, AVR, ARM, 8086, and MSP430, helping users simulate circuit operations and circuit design, widely used in education and industrial design.

[64/32-bit Download Link]:

https://pan.baidu.com/s/1TnGuZZq3olw3fOi_Sqs9bw?pwd=n5rf

Password:n5rf

For installation issues or remote installation, please contact:Customer Service

InstallationSteps

1. Right-click the downloaded installation package and select Extract.

2. After extraction, you will get an installation folder, open it.

3. Right-click on Proteus 75SP3 Setup, select Run as administrator

4. Click Yes

5. Click OK

6. Click Next

7. Click Yes

8. Check Use a license key installed on a server, then click Next

9. Click Next

10. Click Browse… to select the installation location (remember this installation location, you will need to find it later), then click Next

11. Click Next

12. Click Next

13. Installation in progress

14. Installation complete, uncheck and click Finish

15. Return to the extracted installation folder, open the Crack folder

16. Copy these two files

17. Paste them into the software installation directory (the installation location you remembered in step 10)\BIN folder

18. Then right-click on LXK Proteus 7.5 SP3 v2.1.2, select Run as administrator

19. Click Browse… to select the software installation directory (the installation folder you remembered in step 10), then click Update

20. Click OK

21. Close it

22. Return to the extracted installation folder, open the Language folder

23. Copy these two files

24. Paste them into the software installation directory (the installation location you remembered in step 10)\BIN folder, select replace

25. After the software is installed, it is divided into two commonly used software: ISIS 7 Professional and ARES 7 Professional. ISIS is used for drawing circuit diagrams and simulation, while ARES is used for drawing printed circuit boards. Choose according to your needs. The software icon will not automatically appear on the desktop, we need to find it ourselves. Open the software installation directory (the installation location you remembered in step 10)\BIN folder, find the ISIS icon, right-click on the icon → Send to → Desktop shortcut!