[Name]:Proteus 8.9

[Size]:505.21MB

[Language]: Simplified Chinese

[Applicable Systems]:Windows 7, Windows 8, Windows 10, Windows 11

[Introduction]:Proteus is an embedded system simulation development software that implements a complete design from schematic design, microcontroller programming, system simulation to PCB design, truly achieving the full design from concept to product. Its processor models support 8051, HC11, PIC10/12/16/18/24/30/DsPIC33, AVR, ARM, 8086, and MSP430, helping users simulate circuit operations and circuit design, widely used in education and industrial design.

[64/32-bit Download Link]:

https://pan.baidu.com/s/1v3a0ieqYmEGBiI66Rn-MrQ?pwd=7bx3

Password:7bx3

For installation issues or remote installation, please contact:Customer Service

InstallationSteps

1. Right-click the downloaded installation package and select Extract.

2. After extraction, you will get an installation folder, open it.

3. Right-click on P8.9.sp0 and select Run as Administrator.

4. Click Next.

5. Check I accept… then click Next.

6. Click Next.

7. Click Next.

8. In the new window that pops up, click Browse For Key File in the lower left corner.

9. In the pop-up box, find the Licence.lxk file, select it, and open it (the file is in the installation folder extracted in step 2).

10. Then click Install.

11. Click Yes.

12. Then click Close in the lower right corner to close this page.

13. If there is an old version of the software on the computer, you can import the old settings here. If not or if you do not need to import, just click Next.

14. Click Custom.

15. The default installation location cannot be changed (it must be default, otherwise it will not work). Then click Next.

16. Click Next.

17. Click Next.

18. Click Install.

19. Installation in progress.

20. Installation complete, click Close.

21. Return to the extracted installation folder, copy pp8.9.

22. Find the software icon on the desktop, right-click, and select Open File Location to open the software’s installation directory.

23. Paste the copied pp8.9 into this folder.

24. Then right-click it and select Run as Administrator (running it will not show any prompts, it will just flash, confirming it is running).

25. Return to the extracted installation folder, copy the Translations folder.

26. Find the software icon on the desktop, right-click, and select Open File Location to open the software’s installation directory.

27. Then click the previous directory as shown below.

28. Paste the copied Translations folder into this directory, selecting replace.

29. Open the software.

30. Ok, installation is complete.

Long press the QR code to follow us.

Software Installation

Public account focused on software installation