DIY Guide to Building an SDR Receiver from 46MHz to 6GHz Using ADALM-PLUTO

DIY Guide to Building an SDR Receiver from 46MHz to 6GHz Using ADALM-PLUTO

DIY Guide to Building an SDR Receiver from 46MHz to 6GHz Using ADALM-PLUTO

ADALM PLUTO Frequency Extension and CPU Core Modification

“Here, we look at the ADALM-PLUTO frequency extension modification to allow our receiving frequency to range from 70 MHz to 6GHz. I actually managed to bring it down to 46MHz!”

DIY Guide to Building an SDR Receiver from 46MHz to 6GHz Using ADALM-PLUTO

Ham Radio Topic: You can build an SDR receiver station and balcony antenna setup from scratch for just over a thousand yuan | DIY Guide

Ham Radio Topic: How much should you spend on an SDR radio? 8-bit, 12-bit, 16-bit, 18-bit, or 24-bit?

DIY Guide to Building an SDR Receiver from 46MHz to 6GHz Using ADALM-PLUTO

Leave a Comment

×