Home Assistant Smart Home (ESP32C6 with Display)

Introduction: Previously, I used a 1.3-inch I2C display, which was indeed small and caused eye strain. Now, I have switched to a 2.8-inch TFT display driven by ILI9341, which allows for larger font sizes and clearer visibility. nanoesp32c6 2.8-inch ILI9341 driven VCC 3.3V GND GND CS 10 RESET 9 DC 8 MOSI 11 SCK 12 … Read more

Avoid Pitfalls in RTOS LCD Driver Development! A Hardcore Guide for Beginners

Avoid Pitfalls in RTOS LCD Driver Development! A Hardcore Guide for Beginners

Developing an LCD driver under RTOS, are you often confused by FSMC timing and pin configuration? Today, using the STM32 + ILI9341 example, I will guide you step by step from 0 to 1, helping you avoid 90% of the pitfalls! 1. First, understand FSMC and 8080, the ILI9341 supports 8080 parallel timing, and the … Read more

Using the CW32 Module: 2.8-inch and 3.2-inch ILI9341 Color Screens

Using the CW32 Module: 2.8-inch and 3.2-inch ILI9341 Color Screens

1Module Source>>> Product Physical Display: Data Download Link:http://www.lcdwiki.com/en/2.8inch_SPI_Module_ILI9341_SKU:MSP2807 2Specifications>>> Download the data from the link above. Operating Voltage:3.3V-5V Operating Current:90mA Module Size:50.0(H) x 86(V) MM Pixel Size:320(H) x 240(V) RGB Driver Chip:ILI9341 Communication Protocol:SPI Operating Current:90mA Module Size:50.0(H) x 86(V) MM Pixel Size:320(H) x 240(V) RGB Driver Chip:ILI9341 Communication Protocol:SPI 3Porting Process>>> Our goal is … Read more