ESP32C6

Home Assistant Smart Home (ESP32C6 with Display)

by

Introduction: Previously, I used a 1.3-inch I2C display, which was indeed small and caused eye strain. Now, I have switched to a 2.8-inch TFT display driven by ILI9341, which allows for larger font sizes and clearer visibility. nanoesp32c6 2.8-inch ILI9341 driven VCC 3.3V GND GND CS 10 RESET 9 DC 8 MOSI 11 SCK 12 … Read more

Home Assistant Smart Home (IR05 Infrared Module Special Edition)

by
Home Assistant Smart Home (IR05 Infrared Module Special Edition)

Introduction: Since the LD2402 infrared uses a baud rate of 115200, while the IR05 module is set to a default baud rate of 9600, both use the same GPIO pins 4/5 on the ESP32C6. After checking the specifications of both products, it turns out that the IR05 supports 115200, so I changed the baud rate … Read more