Originally, 
Tip: Click on the above “NX Network“↑ for free subscription and follow Lao Ye
In previous versions of NX1899, simply: Preferences—Processing—User Interface—Process Navigator—Show Selected Objects checked✓, then click on the programming strategy to display the tool path.
After enabling the above settings in version NX1899, you must also enable 【Display Tool Path】 to show the tool path each time you click on the strategy.
In lower versions of UG, it is called Select Tool Path; in higher versions of UG, it is called Display Tool Path. The name has changed, and the usage method has also changed. I hope everyone is aware of this.
Long press to follow
This article is an original article from NX Network. In the spirit of technical sharing, we welcome everyone to reprint, but please indicate the source. Unauthorized reprinting, copying, or excerpting without indicating the source is considered infringement.
Email: [email protected]
↓ Click on the “Read the original text” below to go to NX Network for details