NVIDIA, as a world-leading artificial intelligence computing company, has seen its Jetson Nano gain a lot of popularity. However, some frequently needed external components often need to be purchased by oneself.
To address this issue, here are some peripheral products that can enhance your Jetson Nano, making it more powerful and better prepared for your development.
GRIS 150M Micro USB NVIDIA Wireless Network Card (802.11n)
This network card is compact and portable. After inserting it into a USB port, it has a volume of only 1cm, and the transmission speed can reach 150Mbps (with higher speeds in local area networks). It uses CAA technology to automatically adjust bandwidth and avoid channel interference.
It has excellent signal reception capability and stability. The protocol uses IEEE 802.11n, supporting WPA/WPA-PSK, WPA2/WPA2-PSK security mechanisms, providing 64/128/256-bit WEP data encryption.
This product is suitable for Jetson Nano and is widely used in various communication devices such as mobile phones, tablets, and bulky desktop computers, as well as various mini PCs like Raspberry Pi and PYNQ-Z2 series motherboards.
Related link: GRIS 150M Micro USB NVIDIA Wireless Network Card (802.11n)
Jetson Nano Wireless Network Card
This wireless network card is used in Jetson Nano, supporting Bluetooth 4.2 and dual-band WiFi at 2.4G and 5G, with a maximum transmission speed of 867Mbps. It can be equipped with an external antenna, providing good wireless penetration in complex wireless environments with multiple barriers or interferences. It can be directly used by inserting it into the reserved network card interface of Jetson Nano, which is very convenient.
Related link: Jetson Nano Wireless Network Card
Jetson Nano Metal Case
This case is made of synthesized metal, has good oxidation resistance, increases the ventilation area, and reserves an antenna interface, while also leaving a reset button and power switch.
Related link: Jetson Nano Metal Case
NVIDIA Jetson Nano Cooling Case Supporting A02 Version
A beautifully designed cooling case with two fans, one of which can control the fan speed through PWM, aligning with the CPU. The case is sturdy, protects the Jetson Nano while cooling, and has a reset button and a blue backlit power button. The bottom is equipped with four non-slip rubber pads to prevent slipping.
Related link: NVIDIA Jetson Nano Cooling Case Supporting A02 Version
NVIDIA Cooling Fan
Compared to the previous cover-style cooling device, this cooling fan has a higher cost-performance ratio, plug and play, and requires no drivers. The fan connector has a reverse connection prevention design, equipped with a mounting port, which can securely fix the fan to the motherboard, making it convenient to use. Testing shows it can effectively reduce temperature by about 15°C, with good cooling performance.
Related link: NVIDIA Cooling Fan
USB Camera (Compatible with Raspberry Pi and Jetson Nano)
A compact USB interface plug-and-play camera that supports MJPG and YUV formats for video output, with a maximum 30W pixel resolution of 640*480, USB2.0 compatible with Raspberry Pi and NVIDIA Jetson Nano series motherboards, and supports Windows, Linux, and iOS systems, allowing it to be used in various devices.
It can be used for facial recognition, security, image recognition, remote teaching, and other projects.
Related link: USB Camera (Compatible with Raspberry Pi and Jetson Nano)
8 Million USB Camera (with Microphone)
A camera with a chip using Sony IMX179, USB interface, 800W pixels, 3K resolution, supports autofocus, clear imaging, and is more convenient to use with an external case. It is compatible with NVIDIA’s Jetson Nano, Raspberry Pi, and devices running Linux, Windows, etc., with a minimum focal length of 1cm, supporting automatic white balance and exposure. At 1080P resolution, it can support photography at 30 frames per second, video output in JPEG format, working current of 150mA, supports OTG conversion, and has a built-in microphone.
It can be used in biometric recognition, industrial photography, industrial fields, high-definition monitoring, and other areas.
Related link: 8 Million USB Camera (with Microphone)
USB Night Vision Camera (with Microphone)
From the same series as the previous product, it has 200W pixels, working current of 160mA, compatible with NVIDIA’s Jetson Nano and Raspberry Pi. The resolution is lower, but it adds night vision functionality, allowing for good shooting results in low light conditions. It features a digital microphone and can be used as a real-time monitoring camera, meeting the needs for night-time shooting scenarios. The chip uses Sony IMX291, manual focus, video output formats MJPG/YUY2, supporting various replaceable lenses.
It can be used for night monitoring, facial recognition, and more.
Related link: USB Night Vision Camera (with Microphone)
– END –
Previous Issues
Choosing Guide: Carbon Dioxide Sensor
Choosing Guide: Lidar Selection Guide
Choosing Guide: Practical Guide for Driver and IO Expansion Board
Choosing Guide: The Most Comprehensive Selection Guide, Not Just Arduino!
Choosing Guide: How to Select NVIDIA Series Main Control Boards?
Choosing Guide: With So Many Power Modules, How to Choose?
Click to read👆