Download link for Multisim 12:
Click on “Read the original text” at the bottom of the article + Password: vppb
Software Overview
NI Multisim software combines intuitive capture with powerful simulation, enabling quick, easy, and efficient circuit design and validation. With NI Multisim, you can instantly create schematics with a complete component library and utilize the industry-standard SPICE simulator to mimic circuit behavior. With professional advanced SPICE analysis and virtual instruments, you can quickly validate circuit designs early in the design process, thus shortening the modeling cycle. The integration with NI LabVIEW and SignalExpress software enhances the design process with powerful technology, allowing for comparison of implementation modeling measurements with simulation data.
Installation Steps:
1. Select the downloaded software zip file, right-click and choose “Extract to ‘multisim12(E)'”.
2. In the extracted folder, find NI_Circuit_Design_Suite_12.0.exe, right-click and select “Open”.
3. Click “OK”.
4. Click “Unzip”.
5. Click “OK”.
6. Click “Install NI Circuit Design Suite 12.0”.
7. Return to the installation package folder, find keygenfull.exe in the Multisim 12.0 folder, right-click and select “Run as administrator”.
8. Click “Generate”, then click “Copy”.
9. Enter any name, right-click in the blank space next to “Serial Number”, select “Paste”, then click “Next”.
10. Click “Browse” to change the installation path, it is recommended to install it on a disk other than C, you can create a “multisim12.0” folder on D or another disk. Then click “Next”.
11. Click “Next”.
12. Click “Next”.
13. Select the option “I accept the above 3 License Agreements”, then click “Next”.
14. Click “Next”.
15. The software installation is in progress (it takes about 10 minutes).
16. Click “Next”.
17. Click “Restart Later”.
18. Return to the installation package folder, find NI_Circuit_Design_Suite_12.0.exe in the Multisim 12 folder, right-click and select “Run as administrator”, then click “Create license file…”.
19. In the pop-up window, open the multisim12 folder (refer to the path in step 10), enter “key” in the file name field, and click “Save”.
20. Click “OK”.
21. Select “Ultiboard PowerPro Edition”, click “Create license file…”.
22. In the pop-up window, enter “key1” after the file name, and click “Save”.
23. Click “OK”.
24. Click the Start menu, click All Programs. Find and open NI License Manager.
25. Click “OK”.
26. Drag the key.lic file from the Multisim 11 folder into the NI License Manager.
27. Click “Yes”.
28. Click “Yes” and close this software.
29. Return to the installation package folder, select the Chinese-simplified folder in the Multisim 12 folder, right-click and select “Copy”.
30. In the software installation path, find the Multisim 12.0 folder (refer to the path in step 10), right-click and select “Open”.
31. Find the Circuit Design Suite 12.0 folder, right-click and select “Open”.
32. Find the stringfile folder, right-click and select “Open”.
33. Right-click in the blank space, click “Paste”.
34. Close this window.
35. Click the Start menu, find and open Ultiboard 12.0.
36. Installation complete.
Not just your world, only as your shoulder
○
Beginner Resource Box
Please leave the warmth of your fingertips
Long press fingerprint, one-click follow
Remember, this is a public account with warmth